耐内压试验Resistance to internal pressure

GB/T 6111-2018 (热塑性塑料管) Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure流体输送用热塑性塑料管道系统 耐内压性能的测定

ISO 1167-1:2006 (热塑性塑料管) Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method流体输送用热塑性塑料管、管件和组件 - 内压阻力的测定 - 第 1 部分：一般方法恒定内压下塑料管失效时间的标准试验方法

ASTM D1598-15 (热固性和热塑性塑料管) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure恒定内压下塑料管失效时间的标准试验方法

GB/T 15560-1995 (热固性和热塑性塑料管) Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids流体输送用塑料管材液压瞬时爆破和耐压试验方法

GB/T 5563-2013 Section 8.1 (橡胶及塑料软管) Rubber and plastics hoses and hose assemblies. Hydrostatic testing橡胶和塑料软管及软管组合件 静液压试验方法

ISO 1402:2009 Section 8.1 (橡胶及塑料软管) Rubber and plastics hoses and hose assemblies. Hydrostatic testing橡胶和塑料软管及软管组合件 静液压试验方法

爆破测试Burst pressure test

ISO 1402:2009 Section 8.3 (橡胶软管) Rubber and plastics hoses and hose assemblies. Hydrostatic testing橡胶和塑料软管及软管组合件 静液压试验方法

GB/T 5563-2013 Section 8.3 (橡胶及塑料软管) Rubber and plastics hoses and hose assemblies. Hydrostatic testing橡胶和塑料软管及软管组合件 静液压试验方法

GB/T 15560-1995 (热固性和热塑性塑料管) Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids流体输送用塑料管材液压瞬时爆破和耐压试验方法

纵向回缩Longitudinal reversion

EN ISO 2505:2005 (取代EN 743) Thermoplastics pipes - Longitudinal reversion - Test methods and parameters热塑性塑料管 - 纵向回复 - 测试方法和参数

GB/T 6671-2001+Amd.1:2003 (热塑性塑料管材) Thermoplastics pipes-Determination of longitudinal reversion热塑性塑料管材 纵向回缩率的测定

环刚度Ring Stiffness

ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness热塑性塑料管。环刚度的测定

GB/T 9647-2015 热塑性塑料管材 环刚度的测定

YD/T 841.1-2016 地下通信管道用塑料管 第1部分：总则

ASTM D2412-11(废止) Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading用平行板加载法测定塑料管外部加载特性的标准试验方法

环柔性Ring flexibility

ISO 13968:2008 Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility塑料管道和管道系统 - 热塑性塑料管道 - 环弹性的测定

拉伸性能Tensile property

ISO 6259-2: 2020 (PVC管材) Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)热塑性塑料管——拉伸性能的测定——第 2 部分：由未增塑聚氯乙烯 (PVC-U)、取向未增塑聚氯乙烯 (PVC-O)、氯化聚氯乙烯 (PVC-C) 制成的管道和高抗冲聚氯乙烯 (PVC-HI)

拉伸性能Tensile property

ISO 6259-3: 2015 (聚烯烃管材) Thermoplastics Pipes - Determination of Tensile Properties - Part 3: Polyolefin Pipes热塑性塑料管 - 拉伸性能的测定 - 第3部分：聚烯烃管